Precision high-temperature furnace

lInner box size: 500 * 500 * 500mm (width * height * depth) ;

lInternal volume：125L

lOuter box size: 1100 * 1500 * 1100mm (width * height * depth), subject to the actual product

lController:the controller is located below the machine and the door opens from right to left

lInternal material: internal material is a combination of high-temperature resistant lightweight mullite bricks

lExternal material: external material is SECC steel plate, powder baked paint, with a thickness of 1.2mm

lInsulation material : insulation material is aluminum silicate fiberboard and glass fiber cotton, with an insulation thickness of 180mm

lEquipped with movable and fixed feet, can be pushed freely and fixed in position

lAnalytical accuracy ± 1 ℃.

lThe uniformity of distribution inside the box is ± 5 ℃.

lTemperature range: room temperature~1200 ℃ (can be used between 400~1150 ℃).

lHeating time: about 90 minutes from room temperature to 1050 ℃.

lHeater: The heating material is silicon carbon rod, which is installed on the left, right, and bottom sides of the box.

lThe temperature control is controlled by a PID microcomputer, which can automatically calculate. PV/SV display simultaneously, button setting, can set any temperature value between room temperature and maximum temperature (Taiwan Taisong).

lTimer setting: 

A. From 9.99 seconds to 999 seconds, can choose to set hours, minutes, and seconds (Yangming, Taiwan).

B. Temperature to timing, time to cut off heating current, alarm prompt.

lTemperature sensing force CA (K) type (Taiwan Shenjie).

lThe current controller is SCR thyristor, with high control accuracy.

lHeating method: thermal radiation convection, three sided heating.

lHigh temperature protection system: When the temperature is out of control due to external forces, this system will automatically stop heating and power supply when the set temperature is exceeded by 10 degrees, thereby protecting the safety of your product and machine

lOvercurrent protection system: When the power of the whole machine exceeds the normal power due to excessive applied voltage or other reasons, this system will automatically cut off power to protect the industrial control components of the whole machine from damage.

lVoltage: 380V

lPower: 25KW