The benchtop Brinell hardness indentation measurement microscope is an automated Brinell hardness indentation Optical measurement system developed for Windows based operating systems that can be used with any commercially available Brinell hardness tester to replace the traditional mechanical reading microscope and automatically measure the Brinell hardness value of a specimen. Brinell indentation Optical measuring system adopts advanced machine vision technology, through the digital microscope to photograph the indentation left by the specimen after the test force is loaded by the Brinell hardness tester, which can measure the Brinell hardness value of the specimen tested by different indenters of 10mm, 5mm, 2.5mm, 1mm. During the measurement process, there is no need for human to determine the indentation edge, no need for human to record the indentation length data, no need for human to find the hardness comparison table, automatic measurement, automatic recording, automatic saving, automatic generati

This grinder polisher is suitable for pre grinding, grinding and polishing metallographic specimens. The machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damage the metallographic structure. Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen.

SU-340T Shorten Ultrasonic Hardness Tester is a special manual portable durometer with shorten probe HP-1T made by Sinowon group. It applies method of ultrasonic contact independence to make hardness testing at the spot SU-340C is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of inner wall, such as, engine, pressure vessel, pipeline, etc. SU-340C conforms the standard ASTM A1038-2005, DIN standard DIN50159-1-2008 and China National standard GB/T 34205-2017.