1. Brief Introduction
SVR-110 is a special manual portable durometer with manual probe HP-1K by Sinowon group. It applies method of ultrasonic contact independence to make hardness testing at the spot
SVR-110 is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of finished products, such as, the mold, gear, shaft, rod, screw, rails, etc.
SVR-110 conforms the standard ASTM A1038-2005, DIN standard DIN50159-1-2008 and China National standard GB/T 34205-2017.
2. Product Features:
HV: ±3% HV，HR:±1.5HR, Conform internal standard ASTM A1038, DIN50159
The indention size of SVR-110 is same with HV1 of micro hardness testing in one specimen, it is too small to observe by eyes, it is a non-destructive method for the specimen.
In 2 seconds to get hardness value, working efficiency is 60 times higher than normal bench hardness testers.
3. Technical Specification
Portable UCI Durometer
HV 80-1599; HRC 20-70;
±3% HV; HR:±1.5HR
20-group calibration data, 1000-group measurement data
Temp: -10℃~50℃; Humidity: 30%~80%
Rechargeable lithium battery，battery 4.2V,4800mAh
4. Standard delivery
SVR-110 Main unit
10N manual probe
Rockwell test block