excellent polishing equipment factory for medical devices

Product Feature

◆ Easy to use. One button start, automatic pressure loading, heating and cooling;

◆ High efficiency. New design of heating and cooling units significantly reduce the cycle time. Usually, the cycle time for 30mm diameter specimen is about 8 minutes (except AMP5, about 25minutes);

◆ User-friendly operation interface. Coloured HMI touch screen allows the users to set pressure, heating temperature, heatingtime and cooling time easily;

◆ Real-time temperature curve display;

◆ 10 memory modes which can set and save the parameters;

◆ Two specimens can be produced simultaneously with the use of a spacer;

◆ Three cooling modes: time, temperature, manual. It also has water-saving function;

◆ The cover is made of high temperature resistant composites by integral molding;

◆ Mobile plastic recirculation coolant tank is optional.

Specification

Description	AMP5	AMP6	AMP7	AMP8
Operation	Automatic
Pressure	Air	Air	Hydraulic	Hydraulic
Cooling	Automatic/manual
Mold	○25 ●30 ○40 ○50mm, others can be customized
Max Force（kgs）	300	500	1200	4000
Max Tem（℃）	180	180	200	200
Heater	600W	1.2KW	1.2KW	1.5KW
Dimension(WxDxH)	400x400x420	400x400x420	350x400x420	410x480x430
Weight	25Kg	25Kg	30Kg	48Kg
Power	220V50Hz
Air source	Need	Need
Cooling Water	Need
Mold Release	○	○	○	○
Black Resin	●	●	●	●
Green Resin	○	○	○	○
Red Resin	○	○	○	○
Conductive Resin	○	○	○	○
Edge-protection Resin	○	○	○	○
Transparent Resin	○	○	○	○
Air filter	●	●
Funnel&Spoon	●	●	●	●
Drains	●	●	●	●

●Standard○Option

Details

Sinowon polishing equipment factory for medical devices-2

Software Introduction

y******c

The quality control for Sinowon metallographic polishing equipment is required to carry out thoroughly. Before packaging, it will be checked to make sure no impurities are included, and it will be packaged with thick corrugated paper to protect the four corners. VMCs are available in both three-axis and multi-axis configurations, providing flexibility to accommodate various machining requirements. Multi-axis VMCs enable simultaneous machining from multiple angles, allowing for the production of intricate and complex parts in a single setup

k******w

Sinowon metallographic polishing equipment is certified under both domestic and international certifications. It has passed the CCC, CE, RoHS, ENEC， UL, and CB certificates. CNC lathes are capable of producing intricate and complex parts that may be challenging or impossible to machine using manual methods. They can execute complex tool paths and geometries with ease, expanding the range of parts that can be manufactured

e******g

The design of Sinowon metallographic polishing equipment complies with the principles below: accuracy, repeatability, simplicity&complexity, the management of friction, etc. Swiss lathe machines are capable of simultaneous machining operations. While the workpiece is supported by the guide bushing, multiple tools, including turning, milling, drilling, and tapping tools, can perform operations simultaneously. This significantly reduces cycle times and increases productivity

g******b

Sinowon polishing equipment comes with a mattress bag that is large enough to fully enclose the mattress to make sure it stays clean, dry and protected. Its parts are installed firmly, which will prevent the deflection or vibration from happening

v******a

Sinowon metallographic polishing equipment integrates both optical and mechanical designs. Its performance meets the designed specs both during manufacturing and after final assembly. Its axis runs very fast, which can guarantee the highly efficient automatic machining

b******i

In addition to quality that meets industry standards, this product has a longer life than other products. The product can perform quick positioning

Product Message

*Name

Phone

*E-mail

*Content