loading

中文
English
    Home  >  Top PRODUCT  >  Buy Hardness Testing Machines Wholesale  >  Certificated Ultrasonic Hardness Tester Bulk  > 

    Sinowon stable digital portable hardness tester supplier for shaft

    STS3 Series Three-box Thermal Shock Test Chamber
    STS3 Series Three-box Thermal Shock Test Chamber
    The three-tank thermal shock test chamber is used to assess the ability of products (complete machines), components, parts, etc. to withstand sudden changes in temperature. This temperature shock test can understand the impact of temperature changes on the test sample once or multiple times.The main parameters affecting the temperature change test are the high and low temperature values of the temperature change range, the holding time of the sample at high and low temperatures, and the number of cycles of the test.It is generally used in a wide range of fields, from research and development to inspection and production.
    AuToBrin-3000Y Automatic Focusing Visual Brinell Hardness Tester
    AuToBrin-3000Y Automatic Focusing Visual Brinell Hardness Tester
    Automatic Focusing Vision Brinell Hardness Tester AuToBrin-3000Y is mainly used to measure the Brinell hardness of materials. The latest frame structure design, the high precision step-control system and the more intuitive measurement method are adopted. The structure is more stable, the control accuracy is higher, the time and effort are saved, and the accuracy is improved by an order of magnitude. The machine adopts electronic control automatic loading, computer software programming, high-power optical measurement, photoelectric sensor and other systems, and adopts high-precision step control technology to ensure that the load of test force does not overshoot. By manually fitting the indentation edge, the Brinell hardness is automatically calculated and displayed on the LCD screen. The reading is accurate and the operation is convenient.
    VicPad Vickers Hardness Vision Measurement
    VicPad Vickers Hardness Vision Measurement
    Automatic MicroVickers Hardness Tester AutoVicky ZHV-VH2005
    Automatic MicroVickers Hardness Tester AutoVicky ZHV-VH2005
    Vickers method is based on an optical measurement system, it specifies a range of light loads using a diamond indenter to make an indentation which is measured and converted to a hardness value. It is very useful for testing on a wide type of materials, but test samples must be polished to enable measuring the size of the impressions. A square base pyramid shaped diamond is used for testing in the Vickers scale. Typically loads are very light, ranging from 5gf to 2Kgf, although "Macro" Vickers loads can range up to 50 Kg or more. Micro Vickers hardness methods are used to test on metals, ceramics, and composites - almost any type of material. Since the test indentation is very small in a Vickers test, it is useful for a variety of applications: testing very thin materials like foils or measuring the surface of a part, small parts or small areas, measuring individual microstructures, or measuring the depth of case hardening by sectioning a part and making a series of indentations to describe a profile of the
    Sinowon stable digital portable hardness tester supplier for shaft
    Sinowon stable digital portable hardness tester supplier for shaft

    Sinowon stable digital portable hardness tester supplier for shaft

    Sinowon stable digital portable hardness tester supplier for shaft
    Sinowon stable digital portable hardness tester supplier for shaft

    Sinowon stable digital portable hardness tester supplier for shaft

    Model
    SVR-110H
    Code#
    882-110
    Accuracy
    HR:±1.5HR
    Warranty
    12 month
    Delivery Time
    15-30days
    Standard
    ASTM A1038-2017; DIN50159-2009; GB/T 34205-2017
    Certificate
    CE
    Price
    Get Latest Price
    Inquire Online
    Get the latest price
    Quantity Needed：
    Pieces
    E-mail：
    Product Comparison
    hardness testing machines, manufactured based on high-quality materials and advanced technology, has reasonable structure, excellent performance, stable quality, and long-lasting durability. It is a reliable product which is widely recognized in the market.Compared with products in the same category,Sinowon's hardness testing machines's outstanding advantages are as follows.
    Company Advantages
    1. The assurance of digital portable hardness tester design makes Automatic vision measuring machine more attractive.
    2. The product features enough traction. The outsole effectively makes contact with the ground and the grooves and treads can help maintain traction.
    3. The product has a smooth surface and a delicate texture. I love this product as it didn't have any problems such as cracks and burrs. - One of our customers said.
    4. It brings people more comfortable wearing experience. It produces no more allergic reaction and objectionable odor for the wearer.


    1. Brief Introduction

    SVR-110 is a special manual portable durometer with manual probe HP-1K by Sinowon group. It applies method of ultrasonic contact independence to make hardness testing at the spot

    SVR-110 is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of finished products, such as, the mold, gear, shaft, rod, screw, rails, etc.

    SVR-110 conforms the standard ASTM A1038-2005, DIN standard DIN50159-1-2008 and China National standard GB/T 34205-2017.

     

    2. Product Features:

    2.1High Accuracy

    HV: ±3% HV，HR:±1.5HR, Conform internal standard ASTM A1038, DIN50159

    2.2Microscopic Indentation

    The indention size of SVR-110 is same with HV1 of micro hardness testing in one specimen, it is too small to observe by eyes, it is a non-destructive method for the specimen.

    2.3Qucik Measurement

    In 2 seconds to get hardness value, working efficiency is 60 times higher than normal bench hardness testers.

     

    3. Technical Specification

    Product Name

    Portable UCI Durometer

    Model

    SVR-110H

    Code#

    882-110

    Testing force

    Manual 10N

    Hardness Range

    HV 80-1599; HRC 20-70;

    Accuracy

    ±3% HV; HR:±1.5HR

    Measuring Scales

    HV/HRC

    Language

    English, Chinese

    Data Output

    RS232

    Data Saving

    20-group calibration data, 1000-group measurement data

    Working Conditions

    Temp: -10℃~50℃; Humidity: 30%~80%

    Power Supply

    Rechargeable lithium battery，battery 4.2V,4800mAh

    Rechargeable Voltage

    AC220V/50Hz, 110V/60Hz

     

    4. Standard delivery

    Accessories

    Code #

    Accessories

    Code #

    SVR-110 Main unit

    882-110H

    10N manual probe

    882-241

    Rockwell test block

    882-641

    Probe cable

    882-801

    USB Recharger

    882-851

    USB cable

    852-810

    Carrying case

    882-901

    Carrying   case

    882-901

    Operation   manual

    SVR-110H

    Warranty   card

    SVR-110H

    Quality certificate

    SVR-110H

    Packing list

    SVR-110H

     

     

     


    Company Features
    1. Sinowon Innovation Metrology Manufacture Limited. is influential firm mainly dealing with Automatic vision measuring machine.
    2. The standard nature of these processes permits us to fabricate digital portable hardness tester .
    3. Sinowon is committed to bringing endless benefits and success to each customer throughout the life cycle. Get an offer! Sinowon has gradually expanded its share in the national and international markets. Get an offer!
    Favorable rate
    100%
    Buyer impression
    This product has no buyer impression
    • All reviews(0)
    • Praise (0)
    • Average (0)
    • Bad review (0)
    Product Message
    社媒暂无评论
    ST-1166 Computer-Type Servo-Pull-Pressure Test Machine
    ST-1166 Computer-Type Servo-Pull-Pressure Test Machine
    ST-1166 computer-type servo pull-pressure testing machine is suitable for aerospace, petrochemical, machinery manufacturing, metal materials and products, wire and cable, rubber plastic, paper and color printing packaging, adhesive tape, bags and handbags, textile fiber, food, pharmaceutical and other industries. Can test the physical properties of various materials and finished products, semi-finished products, choose a variety of different fixtures can be done tensile, compression, pull, pressure, bending, tearing, stripping, adhesion, shear and other tests. GB, ISO, ASTM, BS, DIN, JIS and other national or international standards can be tested, for the ideal testing and research equipment for various factory enterprises, technical supervision departments, commodity inspection institutions, scientific research institutes and colleges and universities.
    Read More
    Digital Toolmakers Microscope STM-1050
    Digital Toolmakers Microscope STM-1050
    Read More
    Automatic Precision Cutter AC-200 Series
    Automatic Precision Cutter AC-200 Series
    Read More
    Inverted Metallurgical Microscope IMS-310
    Inverted Metallurgical Microscope IMS-310
    Read More

     

     

    Your Precision, Our Mission

    ABOUT US

    CONTACT US

    Telephone : 0086-0769-23184144
    E-Mail :     mz@sinowon.com
    Website : www.sinowon.com
    Headquarter Address :    C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)

    Factory: Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)

    Copyright © 2018 Sinowon Innovation Metrology Manufacture Limited. | All Rights Reserved 粤ICP备16062806号 

    Get This APP
    Chat Online 编辑模式下无法使用
    Leave Your Message inputting...