◆ DigiRock SR2 can test both Rockwell and Superficial Rockwell hardness scales.
◆ Manually switch 3kgf and 10kgf initial force, to test rockwell and superficial rockwell scales.
◆ Dial reading, resolution is 0.5HR.
◆ Motorized loading/dwelling/unloading to make precision force and excellent results.
|Product Name||Electronic Twin Rockwell Hardness Tester|
|Rockwell Scales||HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK,HRL, HRM, HRP, HRR, HRS, HRV|
|Superficial Rockwell Scales||HR15N、HR30N、HR45N、HR15T、HR30T、HR45T HR15W、HR30W、HR45W、HR15X、HR30X、HR45X、HR15Y、HR30Y、HR45Y|
|Superficial Rockwell Force||15Kgf(147.1N),30Kgf(294.3N),45Kgf(441.3N)|
|Dwell Time||Adjustable 2-60s|
|Loading Control||Motorized loading/dwelling/unloading|
|Max. Height Of Specimen||175mm|
|Execution Standard||GB/T230.2, JIS Z2245, EN-ISO 6508 , ASTM E-18|
Rockwell B Scale HRB: Copper alloys, soft steels, aluminum alloys, malleable iron, etc.
Rockwell C Scale HRC: Steel, hard cast irons, pearlitic malleable iron, titanium, deep case hardened steel, and other materials harder than B100.
Rockwell A Scale HRA: Cemented carbides, thin steel, and shallow case-hardened steel.
Description of Shore hardness tester:
LX-F type Shore hardness tester is suitable for the determination of soft foam, polyurethane foam rubber products’ hardness.
And the Shore hardness tester will be different with the other hardness tester In the aspects of using. When using, the presser foot directly contact to the sample, and see its own weight as force measurement load.
Features of Shore hardness tester:
1:Scope of pressure needle route: 0 ~ 2.5millimeters.
2:The scale value: 0-100 degrees.
3:The force of pressure needle end: 550mN~4300mN(56~438.5g).
4. Weight: 505g
1. Mutual conversion between six kinds of hardness (HL, HRB, HRC, HB, HV and HS) and between the hardness and tensile strength
2. It can display the information of measuring value, average value, date, impact direction, test times, test material, hardness system and so on.
3.A host can be equipped with 7 different impact devices, without calibration, automatic recognition
4. Test date and code can be entered
5.Showing soft calibration function
6.There are charging instructions and low voltage alarm function
7.Any test results can be printed
9.The recharge battery can be replaced by itself
(170~960) HLD (17.9-69.5) HRC
Richter, Shaw, brucelli, Roche B, Roche C, Vivtorinox
+ 6HLD (HLD=760)
The use of temperature
from 0 to 40 degrees centigrade
Print paper diameter
The width of the printed paper
44.5 + 0.5mm
2 to 3.5 hours
Rechargeable power supply
The relative humidity
less than 90%
235 x 90 x 47mm
Copyright © 2018 Sinowon Innovation Metrology Manufacture Limited. | All Rights Reserved 粤ICP备16062806号
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.