loading

A professional manufacturer of measuring & testing equipment.

From bird watching to watching Sports in a stadium

Instructions to Use:

1. Put the binocular strap around your neck so that it saves the binocular to fall down suddenly.

2. Adjust the barrels of the binoculars; all you need to do is move the barrels closer together or further apart as you hold the binoculars up to your eyes. If you have adjusted the binoculars correctly, you should not see a black 'border' when you look through the eyepieces.

3. Locate the central focus wheel, usually in the middle of the two barrels of the binoculars.

Move the wheel slowly as you look at a particular object in the distance to get the best image for your eyes. You might need to re-focus from time to time from far off object to close object.

4. Fine-tune your viewing even more if you have a diopter focus mechanism on your binoculars. Not all binoculars have this focus element, which helps compensate for the difference in vision that you might experience in each of your eyes. The diopter focus adjustment wheel is usually on the right-hand barrel eyepiece.

5. Clean your binoculars after using them. A soft cloth is sufficient for the body of the binoculars. Treated tissue paper used to clean cameras and eye glasses is safe for wiping the lenses. Store binoculars in their carrying case when you're not using them.

Instructions to Clean:

1.Blow dust off each lens with a can of compressed air.

2.Clean off remaining dirt and grease from each lens with lens cleaner and a lens cloth. When cleaning, begin at the center of the lens and swirl towards the outer ends.

3.Scrub crevices of the case with a soft-bristle toothbrush.

4.Wipe the casing with a slightly damp cloth.

Tips & Warnings

* Lens caps should used while the binocular is not in use. Take the lens caps off (to prevent condensation), and use your binocular case to keep your binoculars clean and protected.

*Cleaning lenses with harsh cleaners or rough cloths will scratch the lens.

Instruction align binoculars:

For more details www.spacearcade.in/

1.Set the view for the distance between the pupils(Eyes). Bend both the barrels until you can see one circle of view. It is called interpupillary distance (IPD).

2.To focus the binoculars, close your right eye and see an object with your left eye. Rotate the center focus wheel until the iObject is sharp and clear.

3. Open your right eye and close your left eye. Rotate the right dioptre (eyepiece) until the object is sharp and clear.

4.Both eyepieces are now in focus. You just need to use the center focus wheel to focus another object.

5.New user will have to repeat these steps to achieve alignment and focus the object.

Tips & Warnings

*For zoom binoculars, while at the highest magnification, move the zoom lever to increase or decrease the power to align binoculars.

*If you wear eyeglasses, fold down the rubber eye-cups for comfort and viewing ease to align binoculars.

GET IN TOUCH WITH Us
recommended articles
200 FAQs WHAT' S NEW APPLICATION
How to keep the hydraulic universal testing machine clean



Hydraulic universal testing machines have very high accuracy requirements.
Connection of hydraulic system of tensile testing machine



The hydraulic system is the power drive mechanism of the tensile testing machine.
Application of electronic universal testing machine in automobile industry



The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering workflow



Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
Protection of frequency converter of hydraulic universal testing machine



The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Common failures of electronic universal testing machine



Electronic universal testing machine is a necessary equipment to control the quality of products.
Calibration method of electronic universal testing machine



The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Brief introduction of selective wave soldering defects and prevention



Selective wave soldering defects and their prevention.
Some precautions when using the testing machine



Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
How to measure the tensile force of the testing machine



The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
no data

  Tel: 0086-0769-2318 4144

  Mobile: 0086-137 2828 8444

no data
CONTACT US

Copyright © 2025 Sinowon | All Rights Reserved.

Customer service
detect