How about production process for Vision Software and Accessories?
The production of Vision Software and Accessories requires a great deal of commitment, endurance, and of course, orderly manufacturing process. A complete and highly efficient production process can't be achieved without the combined efforts of staff. It starts with raw materials selection, then raw materials processing, appearance designing, semi-finished products processing, and end-products processing. In addition, the quality inspection process goes throughout the whole process to ensure a high qualification ratio. Different manufacturers may adopt different production methods but the results are almost the same - the products are guaranteed to be high-quality.
As a qualified provider of visual inspection system, Sinowon Innovation Metrology Manufacture Limited. has accumulated rich experience in product design, manufacture, and export. Sinowon's Video Microscope is various in types and styles to meet the different needs of customers. Sinowon put great importance into outline of stereoscopic microscope. Many international famous manufacturers choose this product for its premium quality. The product features safety during operation. The electrical system and its relevant accessories all meet the requirements of IEC general standards. More than 10,000 pcs have been delivered and installed.
To achieve sustainable development, we implement the plan of three wastes treatment, including wastewater, waste gases, and waste residue during the production processes.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.