1. Steps to wipe the appearance of the image measuring instrument: 1. Wipe the surface of the instrument with a dry fine cotton cloth or wet paper towel to wipe off dust or oil stains, etc., and be careful not to damage the surface of the instrument. 2. Wipe the appearance of the instrument with a clean dry cotton cloth dipped in industrial alcohol, especially the steps of wiping the mirror surface of the image measuring instrument with metal and non-metal surfaces: first wipe the mirror surface gently with lens cleaning paper, do not use excessive force to avoid damage to the mirror surface . 2. Dip a cotton swab with industrial alcohol, gently wipe the surface of the mirror, wait for the alcohol to evaporate before putting it back. Steps to wipe the granite surface: 1. After the measurement, please wipe the granite surface with a dry cotton cloth or wet paper towel to wipe off the residual dust or oil on the parts. 2. Dip a clean dry cotton cloth with industrial alcohol, and then wipe the outer surface of the granite. Alcohol is volatile and will evaporate naturally. 3. If necessary, please wipe again with special maintenance oil for granite. The transmission part of the image measuring instrument: It is divided into a dry friction part and a lubrication part. Dry friction parts are divided into air bearings and toothless screw drive mechanisms. Maintenance steps of dry friction parts: 1. Wipe the friction surface with a dry muslin cloth or wet paper towel to wipe off dust or oil. 2. You can also use a blower to blow off the dust. 3. If necessary, use a clean dry cotton cloth dipped in industrial alcohol or high-grade lubricant to wipe the friction surface.
Your Precision, Our Mission
Copyright © 2018 Sinowon Innovation Metrology Manufacture Limited. | All Rights Reserved 粤ICP备16062806号
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
