Medical researchers as well as scientists have
A hair transplant today transfers approximately 1500 grafts each containing 1-4 hairs that will be transferred to the section of the head being treated. The grafts are pulled from what is called a donor strip at the back of a patient's head. The size of the strip depends upon the number of donor grafts needed. Normally, these strips are at least 75mm long and about 9mm-12mm wide. The scar resulting from the removal of the strip is closed and is not detectable unless subjected to close and detailed examination.
After the grafts are created they are placed in a sterilized petri dish in preparation for the transplant by the surgeon. The patient's front hairline is typically constructed by using single-hair micrografts so it keeps with the natural growth of the hair. Larger areas of the head are transplanted with minigrafts that contain as many as four hairs. It is impossible to use the regular binocular microscopes for a task this tedious.
Thankfully, the Mantis Microscope was discovered to be a popular solution to viewing requirements of low magnification. Tasks such as sample handling, dissection, dental manufacturing, and inspection for quality, all benefit from using the Mantis. The instrument provides true stereo images with magnification capabilities of 2x-10x which can be selected by the user. The instrument is user friendly to operators who wear glasses or contact lenses because of the innovative 'eyepieceless technology' that the Mantis has to offer.
Because of the Mantis' ergonomic design, the combination of optimal posture and high clarity of optical magnification allows operators of the Mantis Microscope to work effectively while being comfortable for extended periods. This is an especially useful feature for technicians who separate follicular units during a hair transplant operation.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.