Operating Regulations and Functional Features of Simply Supported Beam Impact Testing Machine

Operating Regulations and Functional Features of Simply Supported Beam Impact Testing Machine

The simply supported beam impact tester is used to determine the impact toughness of non-metallic materials such as hard plastics, fiber reinforced composite materials, nylon, glass steel, ceramics, cast stone, plastic electrical insulation materials. It is a common equipment for quality inspection in scientific research institutions, colleges and universities, and related factories and mines. The following editor will give you a detailed introduction to the operating procedures and functional characteristics of the simply supported beam impact testing machine. The operating procedures and functional characteristics of the simply supported beam impact testing machine 1. The operating specifications of the simply supported beam impact testing machine 1. Replace the appropriate pendulum according to the requirements of impact energy before the test. 2. Turn on the power switch device, hold the operator to an empty one (not a sample), check whether the passive dialing needle is pointing to zero, if not, the position of the empty pointer should be adjusted, and the hour and empty pointers are zero. Before resetting the display data of the electronic test instrument, adjust the equipment. 3. Excluding the bearing on the edge of the pendulum block, the impact of the gap on the notch support across the center of the impact specimen, such as the impact of notch tension. 4. Press the 'Start' button to promote the pendulum, set high and stable on site, the pendulum has been installed on the ship cleaning machine to circle all obstacles, and the largest energy scale dial pointer. 5. Press the 'Test' button, hammer off the sample, and after the pendulum stops swinging, write down the effect of energy. After the test is over, turn off the power operation and the influence of the machine power, put the operator back to the place. Operating procedures and functional characteristics of the simply supported beam impact testing machine 2. Functional features of the simply supported beam impact testing machine 1. The main body of the simply supported beam impact testing machine is a single-supported column structure, a cantilever hanging pendulum, and a pendulum hammer body U Type; 2. The impact knife is fixed with screws to fix the price of the simply supported beam impact testing machine, which is simple and convenient to replace; 3. The sample is supported by the simple beam type; 4. The main body of the simply supported beam impact testing machine is equipped with safety protection pins and is equipped with Safety protection net; 5. The simply supported beam impact testing machine is semi-automatically controlled, and the swing, hanging, impact, and placement are all electrically controlled, and the remaining energy after breaking the sample can be used to automatically swing the pendulum for the next test Prepare a digital display simply supported beam impact tester, which is especially suitable for continuous impact testing laboratories and a large number of impact tests in metallurgical and mechanical manufacturing departments; 6. Digital display impact testing machine: adopts single-chip microcomputer to control the simply supported beam impact test How to use the machine, single-chip microcomputer measurement, calculation, digital display results. It can calculate and digitally display impact absorption energy, pendulum angle and test average value. Print the test data and the average value of the test. High working efficiency. Simply supported beam impact testing machine with high test accuracy.

Previous post: What are the wide range of uses of the electronic universal testing machine

Next: Precautions for purchase and measurement of pressure testing machine