Operation steps and precautions of the two-dimensional measuring instrument
Operation steps and precautions of the two-dimensional measuring instrument
The two-dimensional measuring instrument is mainly used to measure the dimensions of a two-dimensional plane. The measurement elements include position, concentricity, straightness, profile, roundness and dimensions related to the datum, etc. . Next, Miaoji Precision will talk to you about the operation steps and precautions of the two-dimensional measuring instrument.
The operation steps of the two-dimensional measuring instrument
1. Check whether the main computer, the display screen, and the power plug of the measuring table are connected before starting the machine.
2, turn on the power switch of the host computer, start the computer, and enter the YR-YCSPC software operating system.
3. Click the main program of the two-dimensional element → Yanuxnig, at this time the 'Change Position' dialog box appears on the display frequency, click 'OKAt zero, the dialog box disappears automatically.
4. Enter the most commonly used graphics mode, use the mouse wheel to click 'Middle' on the screen to adjust the brightness of the auxiliary light, so that the image of the object under test is clearly visible.
5. Place the measured object on the glass stage, slowly adjust the X, Y, and Φ axis movement handles, so that the measured object is cleaned and stably presented in the photo frame, ( Be careful not to directly adjust the zoom camera on the θ axis). Then select the measurement and other tools in the toolbar to process the object.
6. After use, turn off the auxiliary light of the camera, and turn 'Middle' to 0. Exit the YR-YCSPC software operating system and shut down the computer. Clean the loading glass table, move the X, Y axis to return the loading peeling table to the initial position.
Precautions for the use of 2D measuring instrument
1. Turn on the power of the imager control box first, and then start the scanning software.
2, when scanning the workpiece with the two-dimensional measuring instrument, pay attention to avoiding light.
3. Clean up the debris on the workbench of the two-dimensional measuring instrument, and then reset the equipment to zero, and pay attention to the movement direction of the probe to prevent the probe from hitting the workpiece during the movement of the two-dimensional measuring instrument .
4. When scanning the workpiece, please do not touch it, otherwise the scanning result will be affected. The scanned surface should not be too inclined, otherwise the measurement will be inaccurate.
5. Do not place heavy objects on the turntable, which may damage the turntable of the imager. It is forbidden to fix the workpiece on the turntable of the two-dimensional measuring instrument and spray contrast agent.
6. Try to avoid an emergency stop when the worktable of the two-dimensional measuring instrument is moving.
The above content is compiled and released by Miaoji. I hope it will be helpful for everyone to use the two-dimensional measuring instrument. Miaoji Precision focuses on the production and sales of precision measuring instruments. At present, it can provide image measuring instruments, two-dimensional measuring instruments, three-coordinate measuring machines, one-key measuring instruments, industrial microscopes, metallographic microscopes and other products. Welcome to consult.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.