What should I pay attention to during the scanning of the workpiece by the two-dimensional measuring instrument?

What should be paid attention to during the scanning of the workpiece by the two-dimensional measuring instrument? Published: 2019-10-12 Source: http://www.microaccuracy.com/ The second element measuring instrument is a very commonly used measuring equipment in industrial production. Before measuring the workpiece, the product must be scanned, and the result of the scan Will affect the accuracy of the measurement, so what should be paid attention to during the scanning of the workpiece by the two-dimensional measuring instrument? Accurate scanning can improve the detection accuracy of the secondary measuring instrument, so the following items should be paid attention to during the workpiece scanning process: 1. When using the secondary element measuring instrument to scan the workpiece, pay attention to avoiding light and not being interfered by other strong light. 2. Be careful not to move the workpiece during scanning, otherwise it will affect the scanning results of the two-dimensional measuring instrument. 3. Pay attention during the scanning process, the scanning surface of the tested workpiece should not be too tilted, otherwise the measurement result will be inaccurate. 4. When moving the side head during scanning, pay attention not to let the side head of the two-dimensional measuring instrument collide with the workpiece to be measured. 5. The scanning movement speed of the two-dimensional measuring instrument should be controlled within a certain range, not too fast, too fast will be detrimental to the instrument, and too slow will affect the process. Also avoid emergency stops. 6. At the end of the scan, pay attention to turn off the laser of the second element measuring instrument to reduce loss and protect the instrument. 7. When the second element measuring instrument is shut down, it is the same as the computer, first close the scanner software and then close the control box. The above are the precautions for scanning workpieces shared by Miaoji. Choosing the appropriate scanning method and correct operation according to the situation of the workpiece can improve the efficiency and accuracy of measurement. Miaoji Technology is currently able to provide a variety of high-performance precision two-dimensional For equipment such as measuring instrument and one-button measuring instrument, customers in need are welcome to contact us for consultation!