Among the different scientific equipments, Microscopes
Another type of microscope is Stereo Microscopes which are utilized very frequently. Observing small insects with the Stereo Microscopes can be compared with watching alien form of life and is very interesting. Both children and adults are very keen about the insect world. Majority of elementary grades and science classes in high schools will have to keep some basic knowledge about insects and entomology. Dead and live insects can be viewed through Stereo Microscope and it is a bit difficult to watch the live insects through microscope as they are always in the move and it would be extremely troublesome to focus upon them.
An Inverted Microscope is a type of microscope having its condenser and light source on the top, pointing downward, when the turret and objective remain below the stage pointing upward. Inverted Microscope is utilized for watching living organisms or cell kept at the lower portion of a big container, for example, tissue culture flash, in a very natural environment compared to a glass slide as is found in a traditional microscope. This is also utilized in applications of micromanipulation where vacant space is needed in respect of manipulator mechanisms and metallurgical applications wherein polished specimens can be kept above the stage and observed from below utilizing objectives of reflecting type.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.