Incoming inspection, production inspection, material research, PCB and SMT inspection analysis, printing, textile inspection, biological anatomy, medical testing and other fields.
Solder PCB board
◆ Integral design, exquisite, fashion, generous;
◆ Built-in FULL HD sensor and VGA integrated camera, can directly connect with the monitor to realize video image and can also use SD card to take picture or record video, which integrate video observation and image storage;
◆ With high definition 0.7~4.5X parallel continue zoom lens, it is more convenient and fast to switch objective magnification;
◆ With adjustable LED surface reflection illumination, is able to control brightness independently;
◆ With 2 million pixel auto focus camera, no need to waste time for manual focus frequently.
|Product Name||Auto Focus Video Microscope|
|Electronic Magnification||32X~206X( VGA 4:3 21”Monitor；）|
|Optical Objective||0.7X~4.5X Horizontal Zoom Lens|
|0.5X C-mount Camera Adapter|
|Camera Parameters||2 million pixel (1920*1080)|
|Frames Per Second：30fps|
|Camera Function||Auto Focus|
|Photograph and Video Record|
|White Balance; Brightness Control; Digital Noise Reduction|
|Illumination||Surface: Adjustable LED Surface Illumination|
|Ring Fiber Illumination Optional|
|Microscope Stand||Z-axis Travel: 100mm|
|Coarse Lifting System|
|Microscope Main Body||VM-500|
|Monitor||Optional 4:3 21.5”|
|Operation Manual/Warranty Card/Certificate/Packing list||VM-500|
VM-500Plus can measure straight lines, angles, concentric circles, parallel lines, point- to -line distance, point and line to concentric circles, diameter, circumference and area, length and width of retangle, and can caculate circumference and area. It can measure the polygon and caculate its area. All the corresponding measurement report can be output to U disk.
|Field of view （0.5X Camera Adapter)|
|Comparision parameter||Optical Stereo Microscope||Video Microscope||HD Microscope VM500Plus|
|Picture|| || || |
|Optical imageing quality||OK||Bad||Good|
|Electronic imaging quality||X||Bad||HD|
|Working Distance||Short||Short||Long W.D 164.43mm|
|Manual focus||Frequent Operation||Frequent Operation||Automatic|
|Labor cost||High||High||Save Money|
|Vision protection||Bad||Not Bad||Good|
|Price||Low Cost||Low Cost||Equal Value|
|Efficiency||Not high||Not high||High|
|Evaluation:VM-500Plus HD microscope save your money,save your time|
|Some of Clients List of Video Microscope|
|1||VM-500||Nidec Seimitsu Corporation(Dongguan/China)|
|2||VM-500||ASM Pacific Technology Ltd(Shenzhen/China)|
Test samples and requirements:
Measured workpiece:small transformer (as shown in the red circle)
Product dimension: 20X30mm
Measurement requirements: Fully check the welding part of small transfomer is defective and wether the plastic coil is damaded
Instrument used: Auto Focus Inspection&Measuring Video Microscope VM-500 Plus
Figure 1. Small Transformer（as shown in the red circle）
Current pain points
1. The customer needs a videoscope inspecting solution with precision, fast-speed and autofocus.
2.It is known that Manual focusing microscope requires the operator to spend a lot of time to adjust. It is not suitable for mass nondestructive measurement or full inspection.
3.Microscopes that are not equipped with video observation through eyepieces are not convenient for the operator to observe, and are not conducive to protecting the eyesight of the operator
4.Microscopes without photo and video functions are not convenient for operators to collect product and sample information
Our Sinowon solution:
According to the current pain points of measurement, we decided to use an Auto Focus Inspection&Measuring Video Microscope VM-500 Plus to measure the small transformer.
Sinowon VM-500 adopts high definition 0.7~4.5X parallel continue zoom lens, it is more convenient and fast to switch objective magnification;, which can fully inspect the damage of the small transformer without frequent manual operation, effectively guaranteeing the production quality of the product.
Note: The two pictures show the welding part and plastic coil of small transfomer under the VM500 Plus 0.7X image
VM-500 Plus is able to inspect the welding part of small transformer with precision, fast-speed and auto focus solution. It is widely used in the field-incoming inspection, production inspection, material research, PCB and SMT inspection analysis, printing, textile inspection, biological anatomy, medical testing and other fields.
VM-500 has simple operation and high reliability.
While using the VM-500 to improve the quality control of the enterprise, it also reduces the loss and increases the profit of the enterprise.
Usage: https://www.youtube.com/watch?v=fBa35cSdj1g ( Here is a video made up for helping you know more about our VM-500 Plus)
To enjoy 5% discount off if fill in the following inquiring information table, the question or inquiry will be replied in a short time.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.