Automatic image measuring instrument tells you how to maintain the image measuring instrument
The automatic image measuring instrument tells you how to maintain the image measuring instrument. Instrumentation is suitable for all kinds of production enterprises, and is widely used in electronic production enterprises. Many electronic products are tested by instruments before they leave the factory. Instruments such as image measuring instruments detect electronic components. Instrument testing can reduce the chance of waste and defective products, and can improve the quality of enterprise products. However, the maintenance of the instrument is also very important. Wipe the appearance of the image measuring instrument: first wipe the surface of the instrument with a dry cotton cloth or wipe paper to wipe off dust or oil, and pay attention to the appearance of the instrument. Then use a clean dry cotton cloth dipped in industrial alcohol to wipe the surface of the instrument, especially metal and non-metal surfaces. Steps for wiping the mirror surface of the image measuring instrument: first wipe the mirror surface gently with lens paper, do not use force to avoid damage to the mirror surface. Then dip a cotton swab into industrial alcohol, gently wipe the surface of the mirror, and wait for the alcohol to evaporate before reloading. Wipe surface cleaning steps: first wipe the granite surface with a dry cotton cloth or wipe paper to wipe the dust or oil left by the machine. Then use a clean dry cotton cloth dipped in industrial alcohol to wipe the outer surface of the granite. The alcohol will evaporate naturally after it evaporates. If necessary, please use special granite maintenance oil to wipe. The transmission part of the image measuring instrument: the dry friction part and the lubrication part. The dry friction part has the difference between an air bearing and a gearless screw drive mechanism. Maintenance steps of automatic image measuring instrument components: first wipe the surface with a dry cotton cloth or wipe paper to wipe off the dust or oil. You can also use a hair dryer to blow off the dust. If necessary, use a clean, dry cotton cloth and industrial or high-grade lubricant to wipe the surface.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.