Cost-effective mortar abrasion tester, 6 stations can be used alone or at the same time
Manufacture MLW-6 mortar wear testing machine, and own abrasive wear testing machine. The MLW-6 mortar wear testing machine is a free abrasive wear testing machine developed and manufactured. It consists of a transmission system, a sample fixture part, a mud tank, a mud tank cooling system, a mud tank lifting system, an electrical part and a base. The product performance is superior, the operation is convenient, and the six stations can be used alone or at the same time.
The working principle of MLW-6 mortar wear tester:
It uses the motor to rotate the sample to drive the ore, sand, alumina and other abrasives mixed with water to wear various metal or non-metal materials. During the rotation of the sample, the quartz sand and water wash and strike the surface of the sample , Cause the loss of surface material constant loss, through orthogonal test from the perspective of experimental wear failure characteristics, take the molecular weight of the material and the molding process conditions as the orthogonal experimental factors, carry out the experimental research on the wear performance of the mortar, so as to carry out the wear resistance of the material test. And it is necessary to observe the wear surface morphology of the material under an electron microscope to explore the mortar wear law of the material.
Main technical specifications
1. Equipment station: six stations
2. The direction of motor rotation is clockwise
3, motor speed 1200 rpm
4. Mortar ratio: abrasive (silica sand or alumina)/cement slurry 3:2
5, sample size length x width x thickness u003d 76.2x25.4x6.35 mm
6. Dimensions (length x width x height) 1600*900*1730 (unit mm)
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.