Fiber optic cross connect cabinet is an outdoor
The Cross-connection Cabinet can be applied in active link with trunk optical cables and cable distribution, accomplishing fusion, storage, distribution and dispatch for the cables. Its capacity can be flexibly customized as required and built-in direct splice unit is capable for providing direct connection function. It also can able to counter abrupt climate change and extreme environment. It is suitable for outdoor light splitter in FTTH application, provided with light splitting function, easy for installation, safety in use and reducing costs.
Fiber media converters can connect different Local area network (LAN) media, modifying duplex and speed settings. For example, existing Half-Duplex hubs can be connected to 100BASE-TX Fast Ethernet network segments over 100BASE-FX fiber. When expanding the reach of the LAN to span multiple locations, media converters are useful in connecting multiple LANs to form one large campus area network that spans over a limited geographic area.
The cabinet has the functions of fiber distribution, splice, storage and dispatch. It has dogged performance of resisting the open-air environment and can resist severe climatic changes and serious working environment. The protection grade reaches IP65. The cabinet is made from quality stainless steel. It has not only excellent performance of anticorrosion and aging resistance but also pleasing appearance. The cabinet has the advantages of small volume and large capacity of 288 cores. More than 10 pieces of optical cables can be inlet.
Characteristics:
Ingellen Fiber Cross connect Cabinet will adapt to various bad weather conditions, with reliable sealing, water-proof and damp proof. Cross connect cabinets allow for termination of and cross- connections between cabling elements.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.