Hair transplant surgery is an advanced procedure
In modern hair transplant surgery, approximately 1,500 grafts, each containing 1 to 4 hair follicles, are transferred to the area of the head to be treated. These grafts are typically taken from the back of a patient's head. The strip of hair removed from the head is typically 9 - 12mm in width and 75mm or greater in length. Once the strip has been removed, the scar is closed up and remains invisible until further detailed examination is conducted.
Once the grafts have been produced, they are kept in Petri dishes, ready for the actual hair transplant procedure by a surgeon. The front hairline is typically constructed with the use of single-hair micro-grafts so that the direction of hair growth is maintained. Larger parts of the head however are covered with mini-grafts which usually consist of four hairs.
Across the globe, the Mantis Transplanter is being used for tasks that require low magnification viewing such as those involved in dental manufacture, dissection and sample handling. It is also being used for tasks involving detailed inspection and quality checking such as in the quality control process of specific engineered products.
The ergonomics of this device was specifically designed to allow optimal posture and high optical performance. Unlike a regular binocular microscope, this instrument, which boasts of 'eyepieceless technology', provides users with true stereo images between 2x and 10x magnification. This innovative technology makes it possible to work while wearing corrective eyewear such as contact lenses or spectacles.
This important feature will not only increase productivity of the user, but at the same time, enable operators of the Mantis Microscope to work for long periods with utmost comfort and effectiveness.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.