How does Sinowon manufacture ultrasonic hardness tester?
In Sinowon Innovation Metrology Manufacture Limited., the production process of ultrasonic hardness tester can be summarized briefly as follows. Raw materials, as the basic elements for manufacturing the products, should be prepared first of all. Having been tested thoroughly, they will go through a formal processing treatment. Please pay attention to the changes which may involve several phases of chemical reactions because these changes will finally decide the performance of the finished products. Then, after shaping up the products, quality tests will be carried out. For more details, we welcome your on-field visit to our factory.
Sinowon has been devoted into manufacturing Video Microscope for years. The portable hardness tester series is one of the main products of Sinowon. The production stages of Sinowon hardness measurement involve a few aspects. It has to undergo die casting, finish machining, CNC machining, surface treating, and electrostatic spraying. The product performs well in program control and material use reduction. The product features corrosion resistance. Some methods or treatments have been used to resist corrosion such as painting or hot dip galvanizing. It has been marketed successfully for 12 years, thanks to the excellence in quality and technology.
our company's ongoing business concept is stereoscopic microscope. Contact us!
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.