How does the automatic image measuring instrument solve the problem of imaging astigmatism?
How does the automatic image measuring instrument solve the problem of imaging astigmatism?
The problem of imaging astigmatism has always been one of the factors restricting the measurement accuracy of fully automatic image measuring instruments. Many research centers of manufacturing enterprises are devoting themselves to this problem. So, what is the astigmatism problem of the automatic image measuring instrument? How to deal with it? Next, MiaoJi will answer for everyone.
In actual operation, after turning on the switching power supply, if the image is not concentrated on the big screen and the resolution is low, we call it the image measuring instrument Astigmatism failure. At this time, no matter how to update the objective lens or change the measurement angle, the same picture is displayed on the big screen. At the beginning of this situation, many people didn't know much about it, and thought it was caused by dirt on the lens. As a result, I wiped it with my hand, and the effect was counterproductive, and the picture became more unclear.
For the above problem, we first confirm whether it is caused by the astigmatism of the automatic image measuring instrument. If it is determined that the astigmatism is faulty, the treatment method is as follows:
First, it is very likely It is caused by the LED not concentrating, turn off the power, fold the body of the automatic image measuring instrument, and replace the LED installed on the lamp holder. After replacing the LED, restart the power to check whether the problem still exists. Generally, it is almost the same. This is the reason.
Secondly, disassemble the base and check whether the mirror surface of the glass is uniform. Even the division will not cause astigmatism, and unevenness will cause astigmatism.
Through the above two methods, the astigmatism problem of the automatic image measuring instrument can generally be solved by cutting the bottom. For more questions about the image measuring instrument, welcome to consult Miaoji Precision, we will serve you wholeheartedly.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.