How does the hydraulic universal testing machine complete the force value verification?
How does the hydraulic universal testing machine complete the force value verification?
How to complete the force value verification of the hydraulic universal testing machine? It is through a series of steps to make the force value of the testing machine meet the requirements of the corresponding standards. Usually, the operation is performed by the manufacturer and the Quality Supervision Bureau. The user does not need to master it, but it is good to know it.
1. The steps of force value verification of hydraulic universal testing machine:
1. Enter the program as an administrator and open 'Information Management' and 'Sensor Verification';
2. Set the detection point and detection value, select the detection channel (the default is the force channel), and select the number of detection groups (the default is three groups);
3. Click 'Confirm' on the 'Verification Point Settings' page to enter the verification;
4. Turn on the oil pump and click 'Run' on the operation control panel.
5.
When the machine load is close to the calibration (verification) point, manually control the slow speed (if it is automatically loaded, click the slow button in the 'verification interfaceKey' to record the point;
6. Repeat step 5 and record the points that need calibration (verification) in turn;
7. After a set of calibration is completed, the program automatically stops running (click 'End' to exit the calibration interface and enter the 'Display Verification Results' interface), click 'Run' again to proceed to the next set of verification;
8. After three sets of verifications, the program will automatically exit the 'Display Verification Results' interface.
Check the calibration error. If the error exceeds the standard, please modify the calibration code. The above is for you to share the force value verification of the hydraulic universal testing machine, it is not harmful to understand it. Hope the above introduction is helpful to you.
Previous: WAW-600D hydraulic testing machine
Next: WEW-600B hydraulic testing machine
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.