loading

A professional manufacturer of measuring & testing equipment.

How to maintain the video measuring instrument about the video measuring instrument

Video measuring instrument is about how to maintain the video measuring instrument. Video image measuring instrument is a precision measuring instrument integrating light, electricity and machinery. It needs good maintenance and maintenance to keep the instrument in good condition. Only in this way can the original accuracy of the instrument be maintained and the service life of the instrument can be prolonged. This article will introduce how to maintain the video image measuring instrument: 1. The two-dimensional imager should be placed at a room temperature of 20°C±5°C and a humidity of less than 60 In a clean and dry room, avoid surface contamination of optical components, rust of metal components, and dust and debris falling into the moving rails, which will affect the performance of the instrument. 2. After using the image measuring instrument, the work surface should be wiped at any time, preferably covered with a dust cover. 3. The transmission mechanism and the motion guide of the imager should be regularly lubricated to make the mechanism move smoothly and maintain a good working condition. 4. The glass and paint surface of the two-dimensional workbench is very dirty, you can wipe it with a neutral detergent and clean water. Do not use organic solvents to wipe the paint surface, otherwise the paint surface will lose its luster. 5. The LED light source of the auxiliary image measuring instrument has a long service life, but when the bulb burns out, please notify the manufacturer, and the professional will replace it for you. 6. The precise components of the image measuring instrument, such as the image system, worktable, optical ruler and Z-axis transmission mechanism, need to be fine-tuned. All adjusting screws and fastening screws have been fixed, the customer should not disassemble it by himself, and notify the manufacturer to solve it. 7. The two-dimensional software has accurately compensated the error between the workbench and the optical ruler, please do not change it by yourself, otherwise, wrong measurement results will be produced.

8. Do not unplug all the electrical connectors of the 2D imager. If you unplug the plug, you must correctly insert and tighten it according to the markings. Incorrect connection may at least affect the function of the image measuring instrument, or worse The situation may damage the system.

GET IN TOUCH WITH Us
recommended articles
200 FAQs WHAT' S NEW APPLICATION
How to keep the hydraulic universal testing machine clean



Hydraulic universal testing machines have very high accuracy requirements.
Connection of hydraulic system of tensile testing machine



The hydraulic system is the power drive mechanism of the tensile testing machine.
Application of electronic universal testing machine in automobile industry



The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering workflow



Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
Protection of frequency converter of hydraulic universal testing machine



The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Common failures of electronic universal testing machine



Electronic universal testing machine is a necessary equipment to control the quality of products.
Calibration method of electronic universal testing machine



The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Brief introduction of selective wave soldering defects and prevention



Selective wave soldering defects and their prevention.
Some precautions when using the testing machine



Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
How to measure the tensile force of the testing machine



The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
no data

  Tel: 0086-0769-2318 4144

  Mobile: 0086-137 2828 8444

no data
CONTACT US

Copyright © 2025 Sinowon | All Rights Reserved.

Customer service
detect