How to use the automatic image measuring instrument?
How to use the automatic image measuring instrument?
As one of the important measurement tools in industrial production, the automatic image measuring instrument will have a serious impact on its service life and measurement accuracy if it is not used correctly. So, how do we use the automatic image measuring instrument?
1. Before hoisting the workpiece, return the probe to the origin to reserve a larger space for the hoisting position; The hoisting of the workpiece must be stable, and no component of the image measuring instrument should be hit.
2. Install the parts correctly, and ensure that they meet the isothermal requirements of the parts and the automatic image measuring instrument before installation.
3. Establish a correct coordinate system and ensure that the coordinate system built meets the requirements of the drawing to ensure the accuracy of the measured data.
4. When the program is programmed to run automatically, it is necessary to prevent the probe from interfering with the workpiece, so pay attention to increase the inflection point.
5. For some large and heavier molds and inspection tools, the workbench should be hung down in time after the measurement to avoid the fully automatic image measuring instrument workbench from being in the load state for a long time.
The above are some of the key points for the correct use of automatic image measuring instruments. I hope it will be helpful to everyone. Miaoji Precision focuses on the Ru0026D and manufacturing of testing instruments, and can provide high-quality coordinate measuring machines, two-dimensional measuring instruments, image measuring instruments, automatic image measuring instruments, etc. Welcome to consult and order.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.