Image measuring instrument, image measuring instrument, two-dimensional image measuring instrument, automatic image measuring instrument, automatic detection, automatic measuring instrument_in
The image measuring instrument uses its own hardware (CCD, eyepiece, objective lens data line) to transfer the captured image to the computer data acquisition card through the data line, and then the software will image on the computer monitor and operate The operator uses the mouse to make quick measurements on the computer. The above process is basically completed in tens of thousands of a second, so it can be regarded as a real-time detection equipment, or a narrow point can be called a dynamic measurement equipment. If the configuration meets the requirements, the equipment will never produce image lag. Depending on the size of the workpiece, different strokes can be selected for the worktable. The brightness of the light source is adjustable, and the most suitable light source brightness can be selected under various light conditions. Advantages: 1. With 3 adjustable light source systems, not only the contour of the workpiece can be observed, but also the surface shape of the opaque workpiece can be measured. 2. Using a cold light source system can avoid errors caused by deformation of easily deformed workpieces in the measurement due to heat. 3. The workpiece can be placed at will. 4. The operation of the instrument is easy to master. 5. It is convenient to measure, only need to use the mouse to operate. 2.5D measurement can be done after adding the probe sensor in the Z axis direction. Limitations after modification: 1. Only 2D measurement can be done. The measurement size of Z axis after modification is limited, the highest measurement is 90mm. 2. After modification, the accuracy of some softer workpieces (rubber products) will be affected. For more information, please contact Mingwei customer service
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.