JWJ series repeated bending test machine maintenance and maintenance methods
The JWJ series repeated bending tester is mainly used for repeated bending tests of metal plates, wires, strips and other materials to test the material's ability to withstand plastic deformation and display defects during repeated bending. As a testing machine, it is regularly maintained and maintained during long-term use to ensure the durability and accuracy of the equipment.
The maintenance and maintenance methods of JWJ series repeated bending test machine are as follows:
All parts of the testing machine should be wiped clean frequently, and the unpainted surface should be oiled to prevent rust. The accessories should also be oiled to prevent rust after use, and be kept properly. During the rainy season, you should pay more attention to rust prevention. If the jaws are used for a long time and there are abrasion marks on the surface, you can change the position of the jaws and continue using it.
The worm pair, gear and other transmission mechanisms of the main engine should be added with molybdenum disulfide grease every six months.
You can remove the six screws of the upper cover, open the upper cover, and apply to all parts to facilitate lubrication.
When the repeated bending test machine is not in use, it should be covered with a cloth to prevent dust from entering and affecting the normal use of the test machine; if it is not used for a long time, please apply anti-rust oil.
The maintenance of the repeated bending tester should be carried out by professionals. If you have any questions during use, please feel free to contact 400-623-6667 for consultation and help.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.