Knowledge sharing of magnification of two-dimensional image measuring instrument
Knowledge sharing of magnification of two-dimensional image measuring instrument
The magnification of two-dimensional image measuring instrument includes two aspects: optical magnification and digital magnification. The magnification based on the principle of geometric imaging is called optical magnification, which is displayed after electronic circuit processing. Magnification is called digital magnification.
The optical magnification is the magnification that the object is imaged onto the photosensitive unit of the CCD through the lens. This part is pure optical imaging and obeys the principle of geometric optics. The optical magnification partly determines the magnification of the image and partly determines the field of view that the CCD can see.
Digital magnification is the magnification effect produced by the CCD photosensitive unit through the processing circuit to display the image on the display is called digital magnification. The table shows the magnification ratio from CCD to display. Commonly used CCD sensor chip sizes are 1/3, 17 Amplification is the process of image enlargement when the image is transmitted through the digital signal to the display. The magnification from the size of the object to the size of the image is called the image magnification. The magnification calculation formula of the two-dimensional image measuring instrument is as follows: image magnification u003d optical Magnification×Digital Magnification.
The knowledge about the magnification of the second-dimensional image measuring instrument is simply shared here. For more knowledge about the image measuring instrument and automatic image measuring instrument, please pay attention to Miaoji Precision news or call for consultation.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.