loading

A professional manufacturer of measuring & testing equipment.

Line boring is applied to increase diameter of

It bores holes in heavy construction machines such as cranes, and is cost worth equipment. This can be handled easily that is available with a pneumatic or hydraulic drive.

There are several functions of a line boring device. A tedious device is capable of calculating bores using adjusted internal and exterior micrometers and its size varies from 40mm to 1500mm diameter.

These machines are used in many applications, such as re boring of holes on any kind of equipment. Additionally repairs to areas such as backhoe and track hoe buckets, explaining joints, wheel loader arm pin-holes, and hinge points in point bed trailers and directing axle sleeves in heavy quality hand automobiles.

The key benefits of using portable boring machine are perfection area machining maintenance can be done on site and in-place. A less amount of taking apart is required, unbolting leaking and down time are reduced, and efficiency is improved.

And if at all the line boring machine to perform it has to be aligned properly. So why alignment is so important?

If boring spindle is not aligned, it might result in improper cuts and waste of things. Imbalance of a tedious machine spindle results in incorrect reduces and lost components. Prevent the loss of money and components by properly aligning the spindle. To perfectly arrange the spindle, use a laser alignment system. These can be provided from heavy equipment manufacturers.

Procedure for aligning:

Attach the laser device system perspective to the end of the spindle where the jig is attached. Measure the gap between the tip of the laser device and the execute table. Make an entry of distance measured into the laser kit.

Make an entry of the number of screws on the work area into the portable unit. The screws recommended are the screws organized in a circular form. Determine the gap between the two screws at the 180 degree. Enter the gap on the portable device and validate your measurement.

Lay the measuring unit at the 90 degree angle. Record the reading and confirm. And then move it to the zero degree angle. Record the reading and confirm. Move the determining system to again at 180 degree angle. Record the reading and confirm. The overall results are confirmed on the board.

Rotate the bolt clockwise to reduced it or counterclockwise to increase it. The readings for each bolt are recorded on the portable unit. Modify the screws until each bolt reads the same range from the laser device.

If you are looking for the best line boring machines, you will have to look for the best portable boring machine manufacturers for your best work to be done.

GET IN TOUCH WITH Us
recommended articles
200 FAQs WHAT' S NEW APPLICATION
How to keep the hydraulic universal testing machine clean



Hydraulic universal testing machines have very high accuracy requirements.
Connection of hydraulic system of tensile testing machine



The hydraulic system is the power drive mechanism of the tensile testing machine.
Application of electronic universal testing machine in automobile industry



The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering workflow



Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
Protection of frequency converter of hydraulic universal testing machine



The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Common failures of electronic universal testing machine



Electronic universal testing machine is a necessary equipment to control the quality of products.
Calibration method of electronic universal testing machine



The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Brief introduction of selective wave soldering defects and prevention



Selective wave soldering defects and their prevention.
Some precautions when using the testing machine



Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
How to measure the tensile force of the testing machine



The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
no data

  Tel: 0086-0769-2318 4144

  Mobile: 0086-137 2828 8444

no data
CONTACT US

Copyright © 2025 Sinowon | All Rights Reserved.

Customer service
detect