Maintenance and maintenance of image measuring instrument
1. The image measuring instrument should be placed in a clean and dry room (room temperature 20℃±2℃, humidity 40%-60%) to avoid surface contamination of optical parts, rust of metal parts, dust and debris falling into the moving guide , Affect instrument performance.
2. After the image measuring instrument is used, the working surface should be wiped clean at any time, preferably with a dust cover.
3. The transmission mechanism and motion guide of the image measuring instrument should be lubricated regularly to make the mechanism move smoothly and keep it in good working condition.
4. The glass and painted surface of the workbench are dirty. You can wipe them clean with a neutral detergent and water. Never use organic solvents to wipe the paint surface, otherwise, the paint surface will lose its luster.
5. The LED light source of the image measuring instrument has a long service life, but when the bulb burns out, please notify the manufacturer and a professional will replace it for you.
6. Precision parts of the image measuring instrument, such as the image system, workbench, optical ruler, and Z-axis transmission mechanism, need to be precisely adjusted. All adjusting screws and fastening screws have been fixed, so please do not Disassemble it by yourself. If there is any problem, please notify the manufacturer to solve it.
7. The software has accurately compensated the error between the workbench and the optical ruler, please do not change it yourself. Otherwise, wrong measurement results will be produced.
8. Generally, do not unplug all electrical connectors of the image measuring instrument. If they have been unplugged, they must be correctly inserted according to the mark and tighten the screws. Incorrect connection may affect the function of the image measuring instrument and even damage the entire system.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.