Coordinate Measuring Machine Taquina Series

Related Products

Coordinate Measuring Machine Haquina443

Multisensor Measuring Machine Micromea443

Product Information

Taquina CMM Stroke Size: 400x500x400 ~ 2000x3000x1500mm

CMM Introduction:

Taquina series of CMMs are made of aviation-grade aluminum alloys, which can meet customers' requirements for high measurement efficiency, and can locate and measure at extremely fast speeds.

The Y-direction adopts a four-sided air-floating structure, which eliminates the motion torsion and ensures the high rigidity and high stability of the machine.

CMM Characteristics:

l Granite fixed worktable, XZ axes are made of high-performance aluminum alloy, Good temperature adaptability and faster movement speed;

l Granite worktable with integral ”dovetail” guide in Y axis, eliminate the pitch and yaw, also provides superior motion stability;

l Z axis air-balance with self-protection, improve motion capability;

l Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stability, lower noise.;

l High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped;

l Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes;

l RENISHAW tonic steel scale, Free expansion with the temperature change;

l Famous parts from all over the world are used in every important sub system.

Technical Specification:

MODEL	Working Travel			Measuring Accuracy				CMM Size			Work Envelope			Weight	Allowed Parts Weight	3D Max Speed	3D Max Accelerated Speed
	X	Y	Z	P		PH		CMM Size			Work Envelope			Weight	Allowed Parts Weight	3D Max Speed	3D Max Accelerated Speed
	mm	mm	mm	MPEE (ｕｍ)	MPEP (ｕｍ)	MPEE(ｕｍ)	MPEP (ｕｍ)	mm	mm	mm	mm	mm	mm	Kg	Kg	mm/s	mm/s2
Taquina 454	400	500	400	1.3+3L/1000	1.3	1.2+3L/1000	1.2	1000	1240	2240	525	995	600	590	500	800	1900
Taquina 564	500	600	400	1.3+3L/1000	1.3	1.2+3L/1000	1.2	1100	1340	2240	625	1095	600	720	500	800	1900
Taquina 686	600	800	600	1.5+3L/1000	1.5	1.3+3L/1000	1.3	1200	1650	2660	730	1400	800	980	700	800	1900
Taquina 8106	800	1000	600	1.7+3L/1000	1.7	1.4+3L/1000	1.4	1400	1850	2660	930	1600	800	1290	1000	800	1900
Taquina 8156	800	1500	600	1.7+3L/1000	1.7	1.4+3L/1000	1.4	1400	2350	2660	930	2100	800	1620	1000	800	1900
Taquina 10128	1000	1200	800	1.9+3L/1000	1.9	1.5+3L/1000	1.5	1690	2370	3150	1190	1814	1040	2490	1800	580	1800
Taquina 10158	1000	1500	800	1.9+3L/1000	1.9	1.5+3L/1000	1.5	1690	2670	3150	1190	2114	1040	2850	1800	580	1800
Taquina 10208	1000	2000	800	1.9+3L/1000	1.9	1.5+3L/1000	1.5	1690	3270	3150	1190	2614	1040	3440	1800	580	1800
Taquina 121510	1200	1500	1000	2.2+3L/1000	2.2	1.9+3L/1000	1.9	1890	2750	3330	1390	2200	1200	3370	2000	500	1100
Taquina 122010	1200	2000	1000	2.2+3L/1000	2.2	1.9+3L/1000	1.9	1890	3350	3330	1390	2700	1200	3950	2000	500	1100
Taquina 152010	1500	2000	1000	2.8+3L/1000	2.8	2.5+3L/1000	2.5	2190	3350	3370	1690	2700	1200	5260	3000	500	1100
Taquina 152512	1500	2500	1200	3.2+3L/1000	3.2	2.9+3L/1000	2.8	2190	3850	3870	1690	3200	1400	6770	3000	450	1100
Taquina 153010	1500	3000	1000	3.2+3L/1000	3.2	2.9+3L/1000	2.8	2260	3910	3420	1690	3700	1200	8160	3000	450	1100
Taquina 153512	1500	3500	1200	3.5+3L/1000	3.5	2.9+3L/1000	3.0	2260	4410	3890	1690	3700	1400	9250	3000	450	1100
Taquina 152515	1500	2500	1500	3.5+3L/1000	3.2	2.9+3L/1000	2.8	2190	3980	4500	1680	3330	1700	7000	3000	400	900
Taquina 153015	1500	3000	1500	3.5+3L/1000	3.5	3.2+3L/1000	3.0	2260	4040	4520	1680	3830	1700	8490	3000	400	900
Taquina 163515	1600	3500	1500	3.5+3L/1000	3.5	3.2+3L/1000	3.0	2360	4540	4520	1780	4330	1700	10010	3000	400	900
Taquina 203015	2000	3000	1500	4.0+4L/1000	4.0	3.5+3L/1000	3.5	2760	4240	4520	2180	3930	1700	11250	3000	400	900

Installing Surrounding

Power Voltage	110/60Hz; 220V/50Hz	Filter Accuracy:	0.3μm	Thermal Gradient:	0.5℃/m	Hourly Temperature Cycle:	0.5℃/h
Air Pressure:	0.5~1.0Mpa	Air Supply:	0.12~0.45m3/min	Relative Humidity:	55%~65%	Temperature Range:	18~22℃

Software Introduction: RATIONAL-DMIS for WINDOWS(64 bit CAD + +)：

l Graphic display, full-scale measuring

l DMIS 5.0 programming, supports advanced programming techniques

l Graphical display includes the measurement process, features, sensor models and output reports

l Outputs available in various formats, including PDF, HTML, EXCEL, DMO, OUT, TXT

l Supports user-defined PDF and Excel templates Complete coordinate system creation, numerous constructions, form error evaluation

l Supports point cloud import & export as well as 3D analysis of curves and surfaces

l Supports 21 parameter CMM error compensation maps

l Supports temperature compensation and real-time temperature compensation of machine/work-piec

l Supports 14 language libraries and provides a quick switch language interface with one button

l Add full-automatic and scan probe Includes all functions in the LITE version of RationalDMIS

l Adds fully automatic probing and continuous contact scanning probes

l Supports all series of Renishaw sensors and sensor changers CAD export/import, sheetmetal/check fixture measurement

l Including all functions in the Lite version of RationalDMIS Contains sheet-metal solutions and check fixture measurement with material offsets etc

l Supports CAD export/import and seamless direct connections with CAD software

l Supports reading and editing of CAD layer and colors

l Supports Q-DAS and DML format data exporting.

l Supports IGES, STEP, DXF, STL

l Auto identification of CAD features, quick CAD-based programming, real time results comparison

l Supports measurement path simulation and planning, anti-collision measurement, intelligent measurement planning measuring path

l CAD seamless connection, all-series sensors, dedicated measuring modules

l Additional optional modules include touch screen, network reporting, and network offline.

RATIONAL-DMIS

Sinowon Inquiry Information Table

To enjoy 5% discount off if fill in the following inquiring information table, the question or inquiry will be replied in a short time.

Thanks a lot for the cooperation