Operation steps of 300 ton pressure testing machine
Operation steps of 300 ton pressure testing machine
The 300-ton concrete pressure testing machine is mainly suitable for testing the mechanical properties of heavy concrete, ordinary concrete, light concrete, etc. for pressure, strength, bearing capacity, and compression load. 1. Before starting the machine, check whether the oil level is normal. If the oil level is too low, add a proper amount of hydraulic oil. 2. Warm up for 2 minutes after starting the machine. Listen to the sound to see if the motor and oil pump work normally. Check for oil leakage. 3. Load the test block, load it steadily, and after the test is quickly crushed, immediately open the oil return valve to let the piston return to its original position. 4. During the test, if the sound is abnormal, the pressure does not rise, or there is oil leakage, the machine should be shut down immediately and a professional should be asked for repair. 5. After the test, clean the 300-ton pressure testing machine, turn off the power, and make a record of the equipment use! For more news and information, please refer to the official website. If you need help, please contact Chenda sales and technical personnel or visit the factory. Factory address: No. 687 Songzhuang Industrial Park, Jingshi West Road, Huaiyin District, Jinan City. All Chenda employees are dedicated to Your service!
Previous: How to choose a tensile testing machine?
Next: The calibration of the sensor of the hydraulic universal testing machine
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.