Repair and maintenance of image measuring instrument about automatic measuring instrument

The repair and maintenance of the image measuring instrument about the automatic measuring instrument. The automatic measuring instrument can easily and quickly carry out 3D coordinate measurement and SPC result classification, which meets the increasingly prominent requirements of modern manufacturing for size inspection: faster and more convenient measurement requirements, and solves another problem in the development of manufacturing . Fully automatic measuring instrument is the stage of image measurement technology, which has the characteristics of high intelligence and automation. Its software and hardware performance make coordinate size measurement convenient and comfortable. It has an automatic learning function based on machine vision and process control. Relying on the high-speed and micron-level positioning of the digital instrument, it can focus on the path of the measurement process, focus, select points and functions. Switching, manual calibration, lighting matching and other operating procedures are self-learning and memorable. The fully automatic image measuring instrument can easily learn all the actual operation process of the operator. Combining its automatic focus and area search, target locking, edge extraction and point selection fuzzy operation to realize artificial intelligence, it can automatically correct the difference and position of the workpiece, and the offset caused by the difference can achieve high precision and repeatability. Precise point selection, therefore, the operator does not need to perform accurate visual alignment, frequent point selection, repeated positioning, function switching and other monotonous operations and heavy tasks to be tested, which increases the efficiency of batch testing by hundreds of times , And meet the needs of industrial sampling and inspection for large-capacity testing. 1. The instrument should be placed in a clean and dry room with a room temperature of 20°C±5°C and a humidity of less than 60 to avoid surface contamination of optical components, rust of metal components, and dust and debris falling into the movement guide, which will affect The performance of the instrument. 2. After using the automatic measuring instrument, wipe the working surface at any time, and then cover it with a dust cover. 3. The transmission mechanism and motion guide of the instrument should be regularly lubricated to make the mechanism move smoothly and maintain good working conditions. 4. The glass and painted surface of the workbench are very dirty. You can wipe it clean with a neutral detergent and water. Do not wipe the painted surface with organic solvents, otherwise it will stain the painted surface. 5. The LED light source of the instrument has a long service life, but when the bulb burns out, please notify the manufacturer and have it replaced by a professional. 6. The precise components of the fully automatic measuring instrument, such as the imaging system, worktable, optical ruler and Z-axis transmission mechanism, need to be precisely adjusted. All adjusting screws and fastening screws are fixed. If there are problems, customers should not disassemble them, please notify the manufacturer to solve them. 7. The software has accurately compensated the error between the workbench and the optical scale, please do not change it yourself, otherwise, it will produce wrong measurement results. 8. Generally, do not unplug all electrical connectors of the instrument. If it has been unplugged, please re-insert and tighten the screws correctly. Incorrect insertion may affect the function of the image measuring instrument to a small extent, or seriously damage the system.