The use and working principle of GBC-60W microcomputer controlled cup punching cup testing machine
The use of GBC-60W microcomputer controlled cup punching cup testing machine:
The GBC-60W microcomputer controlled cup punching cup testing machine developed by the company adopts mechatronics design with a clean and generous appearance. It is a precision equipment for performing process performance tests on metal sheets and strips. It can be implemented with GBT24183- 2009 'Metallic Material Ear Test MethodCupping test' tests the plastic deformation performance of metal sheets and strips during the test. National standard GBT9753 'Paint and Varnish Cupping Test' and GBT15825 'Metal Sheet Forming Performance and Test Methods' test related materials.
The working principle of GBC-60W microcomputer controlled cup punching cup testing machine:
The working principle of this testing machine is to start the oil pump first, and the pumped oil flows through the reversing valve (two-position four-way electromagnetic reversing valve), and then through the speed regulating valve to the clamping cylinder, pushing the big piston up to make the clamp The mold clamps the sample, adjusts the overflow valve to control the clamping force at a certain value, and the excess oil flows to the oil tank through the solenoid valve; when pressing, click on the control software to start, then the servo motor drives the synchronous pulley through the reducer. The lead screw drives the moving beam to rise and pushes the stamping rod to rise to complete the whole test process. The sample has cracks and the peak value drops. The testing machine automatically stops and resets. The clamping force, test force, and test curve can all be displayed on the computer in real time.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.