The working principle of GBC-60W microcomputer control cupping testing machine
The GBC-60W computer-controlled cupping tester is a precision equipment for performing process tests on metal sheets and strips. It can implement the national standard GB/T 4156-2007 'Erickson Cupping Test for Sheets and Strips of Metallic Materials' To test the plastic deformation performance of metal sheets and strips in the test process, it can also be used to test the anisotropy of non-ferrous metal plates with GB5125-85 'Non-ferrous Metal Punching Cup Test Method'.
So what is the working principle of the produced GBC-60W microcomputer controlled cupping tester?
The working principle of the GBC-60W microcomputer control cupping tester is to start the oil pump first, and the pumped oil flows through the reversing valve (two-position four-way solenoid reversing valve), and then through the speed regulating valve to the clamping cylinder, pushing The big piston rises to make the clamping die clamp the sample, the overflow valve is adjusted to control the clamping force at a certain value, and the excess oil flows to the oil tank through the solenoid valve; when punching, click on the control software to start, and then the servo motor decelerates The machine drives the synchronous belt wheel to drive the moving beam to rise through the lead screw and push the stamping rod up to complete the whole test process. The sample has cracks and the peak value drops. The testing machine automatically stops and resets. The clamping force, test force, and test curve can all be displayed on the computer in real time.
The cupping depth (cupping value) is the depth of the punch pressed into the test piece using digital display. The linear mechanical displacement is transmitted to the microcomputer through the electrical signal through the high-precision displacement sensor for analog-to-digital; conversion processing, It is finally displayed in digital quantity, and its reading accuracy can reach 0.01mm.
For the detailed technical information of the cupping tester, please browse the product center-the cupping punching cup testing machine series product detailed description or consult the online customer service, the customer service will introduce the product and quotation to you in detail.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.