SVR-110H Portable Ultrasonic Durometer
1. Brief Introduction
SVR-110 is a special manual portable durometer with manual probe HP-1K by Sinowon group. It applies method of ultrasonic contact independence to make hardness testing at the spot
SVR-110 is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of finished products, such as, the mold, gear, shaft, rod, screw, rails, etc.
SVR-110 conforms the standard ASTM A1038-2005, DIN standard DIN50159-1-2008 and China National standard GB/T 34205-2017.
2. Product Features:
2.1High Accuracy
HV: ±3% HV，HR:±1.5HR, Conform internal standard ASTM A1038, DIN50159
2.2Microscopic Indentation
The indention size of SVR-110 is same with HV1 of micro hardness testing in one specimen, it is too small to observe by eyes, it is a non-destructive method for the specimen.
2.3Qucik Measurement
In 2 seconds to get hardness value, working efficiency is 60 times higher than normal bench hardness testers.
3. Technical Specification
Product Name | Portable UCI Durometer |
Model | SVR-110H |
Code# | 882-110 |
Testing force | Manual 10N |
Hardness Range | HV 80-1599; HRC 20-70; |
Accuracy | ±3% HV; HR:±1.5HR |
Measuring Scales | HV/HRC |
Language | English, Chinese |
Data Output | RS232 |
Data Saving | 20-group calibration data, 1000-group measurement data |
Working Conditions | Temp: -10℃~50℃; Humidity: 30%~80% |
Power Supply | Rechargeable lithium battery，battery 4.2V,4800mAh |
Rechargeable Voltage | AC220V/50Hz, 110V/60Hz |
4. Standard delivery
Accessories | Code # | Accessories | Code # |
SVR-110 Main unit | 882-110H | 10N manual probe | 882-241 |
Rockwell test block | 882-641 | Probe cable | 882-801 |
USB Recharger | 882-851 | USB cable | 852-810 |
Carrying case | 882-901 | Carrying case | 882-901 |
Operation manual | SVR-110H | Warranty card | SVR-110H |
Quality certificate | SVR-110H | Packing list | SVR-110H |
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444Copyright © 2025 Sinowon | All Rights Reserved.