loading

A professional manufacturer of measuring & testing equipment.

ultrasonic humidifiers1

For our comfort and health, we need a certain amount of water in the air.
According to the Environmental Protection Bureau (EPA)
That\'s 30 to 50%.
If the humidity in our house is lower than this level, we will be affected by dry air.
Nosebleeds, cough, dry skin, itchy eyes. . .
These are potential effects of low humidity.
Even our home itself is not immune to the problems caused by dry air.
Low humidity can lead to cracking of paint, drying of furniture, peeling of wallpaper and brittle of wood.
The humidifier helps alleviate these problems by adding moisture to the air.
There are several types of humidifiers, but they all do a basic thing: circulating water through the air.
Ultrasonic humidifier by using high
The frequency sound vibrates into very fine fog and sends it to the air without heating the air.
Using an ultrasonic humidifier, there is no danger of steam burning because the water is cool.
Therefore, ultrasonic humidifier is a popular choice for nursery or children\'s room.
This type of humidifier usually works very fast and quiet.
The Environmental Protection Agency and the Consumer Product Safety Board recently expressed concern that ultrasonic humidifiers can disperse microorganisms and minerals into the air.
However, they have not yet concluded that this poses a significant risk to health.
In the use of an ultrasonic humidifier, measures should be taken to avoid any potential problems of microbial and mineral dispersion.
For example, in order to avoid the growth of microorganisms, water should be replaced every day.
The water tank should be cleaned and disinfected regularly according to the manufacturer\'s instructions.
In order to avoid the risk that the deposit is sent into the air, water with a lower mineral content is used.
Distilled water is very good for this purpose.
Following the manufacturer\'s instructions for use and care carefully, the risk of microorganisms being placed in the air should be reduced.

GET IN TOUCH WITH Us
recommended articles
200 FAQs WHAT' S NEW APPLICATION
How to keep the hydraulic universal testing machine clean



Hydraulic universal testing machines have very high accuracy requirements.
Connection of hydraulic system of tensile testing machine



The hydraulic system is the power drive mechanism of the tensile testing machine.
Application of electronic universal testing machine in automobile industry



The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering workflow



Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
Protection of frequency converter of hydraulic universal testing machine



The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Common failures of electronic universal testing machine



Electronic universal testing machine is a necessary equipment to control the quality of products.
Calibration method of electronic universal testing machine



The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Brief introduction of selective wave soldering defects and prevention



Selective wave soldering defects and their prevention.
Some precautions when using the testing machine



Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
How to measure the tensile force of the testing machine



The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
no data

  Tel: 0086-0769-2318 4144

  Mobile: 0086-137 2828 8444

no data
CONTACT US

Copyright © 2025 Sinowon | All Rights Reserved.

Customer service
detect