What are the commonly used materials suitable for friction and wear testing machines?
What are the commonly used materials suitable for friction and wear testing machines?
The vertical friction and wear tester is a very comprehensive test equipment. Because of its many functions, it is often called a friction tester and abrasion tester. The tested products involve friction performance testing in a variety of industries. Here is a brief introduction to several common materials applicable to this machine.
1. Lubricant: mainly used to evaluate the friction and wear properties of lubricating oil and grease
2. Metal: generally used for wear resistance testing of special purpose materials such as bearings and guide rails
3. Plastics: suitable for measuring the sliding friction and abrasion properties of plastics and plastics and other composite materials. Measure the friction force and friction coefficient of the sample.
4. Rubber: used to test the wear resistance of rubber tires, braking performance and driving efficiency, and the wear resistance of seals
5. Ceramics: mainly for the friction performance testing of ceramic materials.
6. Coating: Test the wear resistance of various coating materials such as spray paint.
For more technical articles and knowledge about friction and wear testing machine, please refer to Chenda website news or call Chenda sales and technical personnel to give you a detailed introduction of relevant technical knowledge. Welcome new and old customers to visit the factory!
Previous: Particulate Matter Filtering and Detecting Machine
Next article: WAW-1000E Electro-hydraulic Servo Hydraulic Universal Testing Machine Controlled by Microcomputer Touch Screen
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.