What are the precautions for using the image measuring instrument?
What are the precautions for using the image measuring instrument?
The image measuring instrument is a high-precision measuring instrument based on CCD digital images, suitable for machinery, electronics, molds, injection molding, hardware, rubber and other fields. So, what should we pay attention to when using the image measuring instrument?
During the use of the image measuring instrument, we should pay attention to the following:
(1) Before hoisting the workpiece, return the probe to the original point to reserve a larger space for the hoisting position; hoist the workpiece smoothly and do not hit any component of the image measuring instrument.
(2) Install the parts correctly, and ensure that they meet the isothermal requirements of the parts and the measuring machine before installation.
(3) Establish a correct coordinate system and ensure that the coordinate system built meets the requirements of the drawing, so as to ensure the accuracy of the measured data.
(4) When the program is programmed to run automatically, it is necessary to prevent the probe from interfering with the workpiece, so pay attention to increase the inflection point.
(5) For some large and heavier molds and gages, the workbench should be hung down in time after the measurement to avoid the image measuring instrument workbench from being in a load state for a long time.
Precision is the soul of precision measuring instruments. If accuracy cannot be guaranteed, then the instrument will lose its value, and image measuring instruments are no exception, and correct operation methods are the key to guaranteeing image measuring instruments. Therefore, please strictly follow the operating precautions as required.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.