What matters should be paid attention to during the scanning process of the two-dimensional measuring instrument?
What matters should be paid attention to during the scanning process of the two-dimensional measuring instrument? Published: 2019-11-01 Source: http://www.microaccuracy.com/ The second element measuring instrument uses a non-contact measurement method, mainly for the two-dimensional plane projection detection of the workpiece, and the workpiece needs to be scanned during the measurement process. The scanning situation will directly affect the measurement results, so what matters should be paid attention to during the scanning process of the two-dimensional measuring instrument? Scanning is a very important link in the measurement process of the two-dimensional measuring instrument. The measurement of the two-dimensional measuring instrument is completed by the scanning of the lens. If you want to ensure the measurement accuracy, you must pay special attention to the scanning of the two-dimensional measuring instrument. The following items need to be noted: 1. When using a two-dimensional measuring instrument to scan a workpiece, you need to pay attention to avoiding light. 2. Pay attention to the movement direction of the probe to avoid the probe hitting the workpiece during the movement of the two-dimensional measuring instrument. 3. When scanning the workpiece, please do not touch the equipment and the workpiece, otherwise it will affect the scanning result of the two-dimensional measuring instrument. 4. When scanning the workpiece, the scanned surface should not be too inclined, otherwise the measurement result of the two-dimensional measuring instrument will be inaccurate. 5. After scanning by the 2D measuring instrument, pay attention to turn off the laser. 6. When shutting down, please close the scanning software of the 2D measuring instrument first, and then close the control box. The above are the matters needing attention in the scanning process of the two-dimensional measuring instrument. Correct use and operation can achieve accurate scanning results, thereby ensuring more accurate measurement accuracy. Of course, the performance and quality of the device itself will also have a certain impact on the scanning effect and measurement accuracy. At present, Miaoji Technology can provide a variety of high-precision two-dimensional measuring instruments and one-button measuring instruments!
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.