What should I do once I receive automatic optical inspection imperfections?
Never hesitate to contact us once you think you have received imperfect automatic optical inspection. We would appreciate much that if you provide us with the inspection report as soon as possible issued by an entrusted third party to prove the quality of the product. Then, we will verify and review every manufacturing process to find out the problems. Among the manufacturing factories, we have to admit that though we always stick to the business principle of "quality first" and ensure a high qualification ratio, we can not avoid the occurrence of some mistakes which may lead to the fact that few imperfections delivered to customers. Please understand and we will deliver you exactly the same products agreed by both parties.
Sinowon Innovation Metrology Manufacture Limited. is a company headquartered in China, specializing in the design and manufacture of hardness tester price. We have gained a reputation for quality, service and competitive price. The instant measurement system series is available in a wide range of types and specifications. The product is not likely to be affected by overcurrent. It is embedded with a thermorelay, an overload protection element, to keep the product from the shock damage of short circuit. The Gost certificate has been obtained for the Russian market. This product is all about blending practicability and aesthetics with styles and techniques. It will elevate a bedroom into a relaxing retreat. Its packing is made seriously to guarantee the safety during shipment.
Environmental protection is the priority of our business. We have initiated advanced production technology to minimize the negative impact on our environment.
Hydraulic universal testing machines have very high accuracy requirements.
The hydraulic system is the power drive mechanism of the tensile testing machine.
The specific application of the electronic universal testing machine in the automobile manufacturing process: The electronic universal testing machine needs to be used for automobile parts.
Wave soldering refers to the molten solder (lead-tin alloy), sprayed by electric pump or electromagnetic pump into the solder wave required by the design, can also be formed by injecting nitrogen into the solder pool, so that it is pre-loaded The printed board of the component realizes the soft soldering of the mechanical and electrical connection between the solder end or the pin of the component and the pad of the printed board through the solder wave.
The frequency converter is a power control equipment that uses frequency conversion technology and microelectronics technology to control AC motors by changing the frequency of the motor's working power supply.
Electronic universal testing machine is a necessary equipment to control the quality of products.
The calibration operation of the electronic universal testing machine is still relatively unfamiliar to friends who use it for the first time.
Selective wave soldering defects and their prevention.
Testing machine, broadly speaking, is an instrument that verifies the quality or performance of a product or material according to the design requirements before it is put into use.
The tensile force is not an accurate value after being measured by the testing machine, and subsequent calculations are required to get the desired value.
Tel: 0086-0769-2318 4144
Mobile: 0086-137 2828 8444
Telephone: 0086-0769-23184144
E-Mail: mz@sinowon.com
Website: www.sinowon.com
Headquarter Address:
C1-508, Tian'an Cyber Park, #1 Glod Road, Nancheng, Dongguan, China (Post Code:523080)
Factory:
Unit 01, Building 7, No. 120, Liantang Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China (Post Code:529000)
International Trade Sector:
C1-501, Tianan, Gloden Road, Nancheng, Dongguan, Guangdong, China(Post Code:523080)
Copyright © 2025 Sinowon | All Rights Reserved.