One Touch, Friend Forever
One Touch, Friend Forever
contact sales at SINOWON.
High accuracy and excellent repeatability
◆ High depth of field, low distortion double telecentric lens, no need to repeat focus.
◆ Software processes the image by the way of Sub-pixel edge detection and automatic removal of burrs and outliers and the least-square method to ensure accuracy.
◆ Automatic location and orientation correction, automatically detect and measure based on the recorded shape of the sample, measure with a click of button.
Efficient batch measurement
◆ Automatically identify multiple parts, test elements, then conduct automatic measurement, satisfied with batch measurement requirements.
◆ Entire image, no need to move the working stage, both high efficiency and high accuracy.
◆ Improve efficiency, save labor cost, eliminate operator error.
Quality Control and Statistical Process Control (SPC)
◆ Automatic memory and output measuring values, and make test data simple applied.
|Lens||0.3X Double Telecentric Lens||0.17X Double Telecentric Lens||0.088X Double Telecentric Lens||0.088X Double Telecentric Lens|
|Working Distance||110 mm||110 mm||120 mm||390mm|
|Wide Field||Ø 30mm(28x24)||Ø 60mm(56x50)||Ø116mm(94x76)||Ø229.6mm(146.7x110)|
|Camera||2/3’’ 5 million pixel B/W camera (Ethernet)|
|Illumination||Digital controls, automatic memory|
|Telecentric Green LED Contour illumination|
|Ring White LED illumination|
|PC System||DELL (I5 Intel processors)|
|Monitors||Built-in 10.4 inch LCD Monitor(1920*1080)|
|External 21.5 inch LCD Monitor(1920*1080)|
|Measuring Software||iMeasuring 2.0|
|Test Time||<5S (Less than 100 tests)|
|Output data||Test data, reports, determine the results (OK, NG, WAIT), etc|
|Function||2D measurements: points, lines, circles, arcs, angles, distance, oval, O-rings, Groove, rectangle, parallelism|
|Auxiliary Function||Intersection, parallel, perpendicular, tangent, bisection.|
|Geometric Tolerances||Dimension tolerances and position tolerances, tolerances of form and position (Point position concentricity, straightness, parallelism, roundness, straightness, profile, etc)|
|Measurement Mode||Manual / Automation|
|SPC Data Management and Control||√|
|CAD Data Input / Output||√|
It is widely used in quick batch measurement of precision screws, precision springs, gears, cell phone case, cell phone glass, precision metal parts and other parts in small size.
To enjoy 5% discount off if fill in the following inquiring information table, the question or inquiry will be replied in a short time.